MacDon M200 Instrukcja Operatora Pobierz pdf (Strona 153)

MAINTENANCE AND SERVICING - M150 ENGINE

Form 169017 / 169087 / 169095 151 Revision C

7.8.8.2 Changing Lubricant

Change gearbox lubricant after the first 50 hours,

and then at 500 hours as follows:

NOTE

The engine should be warm prior to

changing the oil.

a. Stop the engine, and remove the key.

b. Place a drain pan of about 1 U.S. gallon (4 litres)

under the gearbox.

c. Remove drain plug (C), and allow the oil to

completely finish draining.

d. Install the drain plug (C), and remove the check

plug (A).

e. Unscrew breather cap (B), and add lubricant. The

gearbox will require 2.2 U.S. quarts (2.1 litres).

Add sufficient lubricant until it slightly runs out of

hole (A). Use SAE 75W-90 API Service Class GL-

5, Fully Synthetic Transmission Lubricant.

SAEJ2360 preferred.

f. Operate the engine at low idle, and check for

leaks at the check plug and drain plug.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 233 234

Brak uwag

MacDon M200 Instrukcja Operatora Strona 153